Middle Sealing Four Side Sealing Bag Making Machine

• Customization: Available
• After-sales Service: Forever
• Warranty: 1 Year
• Model NO.: HDL-ZUC 600
• Raw Material: PE
• Screw: Single-Screw
• Inverter: Inverter
• Electromagnetic Heater: Electromagnetic Heater
• Automation: Automatic
• Computerized: Computerized
• Customized: Customized
• Certification: CE
• Condition: New
• Trademark: SANBI
• Origin: China

Product Description

HDL-ZUC 600 Middle Sealing,Four side sealing bag making machine 

Description :
This machine processing and assembly is superior, shape is beautiful and structure is reasonable. The whole machine can run smoothly with low noise. It is easy to adjust zipper. Bag hole can be punched accurately. The speed is fast. The machine adopts PLC two servo traction control, temperature centralized control, reducing electricity consume. The feeding system adopts constant tension control, and ensures the smoothness of the material and the accuracy of the control. Middle tension floating roller adopts dynamic compensation mode, to make the process of pulling material fluctuates slightly. Tension control is stably.

Main Technical Parameter:

Function: Middle-side sealing Bag,Four-side Sealing.
Main Electric Device: Two Servo Motor, Panasonic PLC, AC motor masterdrive, Panasonic frequency converter, Temperature control 12 Road, Tension control unwinding.
Base material: two-layer or multi-layer three-side sealing laminated film pouches with zipper sealing and doy-pack making function which take BOPP, PET, CPP, PE, nylon, aluminum foil and paper as base material.
Max working speed: 170 times/min
Max unwinding line speed: ≤38 meter/min (subject to base material)
Making bag size: length (400mm), It adopts times to send when the length is more than 400mm. (Max times to send is six)
Max width of bag: 600mm
Max size of roll material: φ600×1250mm(Diameter×Width)
Location precise: ≤±0.5mm
Heating sealing knife quantity: 4 set Longitudinal Knife, warming and cooling up and down.
Transverse Knife: 3 set warming up and down. 2 set cooling up and down.
Temperature electric heating quantity: 12 piece.
Temperature range: 0~300ºC
Total Power: 50Kw (Starting power is about 25kw, in condition of keeping warm, power is about 20kw)
Overall dimension: 10500×1700×1950mm(L×W×H)
Net weight: About 6000 kg.
Machine steel plate thickness: 10mm (Made in Shanghai, Baosteel)
Control system Model: Japan Panasonic PLC Laminating Film High speed bag making machine control system.

1. Equipment and Parameter
   1. Unwinding device

1. Structural form: horizontal type level station(formed of magnetic powder brake, air cylinder, swing roller, pulling roller sensor and control system )
2. Unwinding bearing: air shaft and pneumatic-lock device.
   1. Unwinding tension

1. Control system: computer control, magnetic powder brake, Compensation potentiometer, rotary encoder, tension system.
2. Adjust drive: PID adjust, PWM drive.
3. Detection mode: Detection by Compensation potentiometer and rotary encoder together.
   1. Edge control device

1. Structure: K type frame vertical translation, adjustment by screw rod.
2. Drive: solid-state relay drive and low speed synchronous motor
3. Transmission: coupling connect
4. Control form: Double photoelectric sensor computer control
5. Detection mode: reflecting type photoelectric sensor detection
6. tracking accuracy: ≤0.5mm
7. Adjustment range: 0-100 mm
   1. opposite side

1. Structure: centre and bothway, rotary type adjust structure.
2. Form: manual adjustment(adjusting handle )
   1. perfect register up and down

1. Structure: single roller adjustment up and down.
2. Form: manual adjustment(adjusting handle )
   1. Longitudinal sealing device

1. Structure: combined type bridge structure, 3sets heating & cooling up and down
2. Heating knife length: 800mm cooling knife length: 400mm
   1. Transverse sealing device

1. Structure: crossbeam type heating and pressing
2. Quantity:transverse heating: 3 sets,length:640mm
3. Cooling : 1 sets,length:640mm
   1. Film Pulling

1. Structure: pneumatic type glue roller pressing and clash type
2. Drive: Inertia in the digital type AC servo system
   (Panasonic or Mitsubishi servo motor: 1Kw,1.5Kw  2000r/m)
3. Transmission: M type Synchronous belt round transmission: speed ratio: 1:2.4
4. Control Form: computer concentrate control
5. Detection mode: photoelectric sensor, nearby switch.
   1. Middle tension

1. Structure: vapour-pressure type float tension roller
2. Control form: computer control, Dynamic exercise compensation
3. Detection mode: noncontacting approach switch
4. float tension roller adjustment range: 0~0.6Mpa
   1.  Main transmission device

1. Structure: The crank rocker push-pull type four bar mechanism
2. Drive: Panasonic 3.7Kw converter drive, 3.7kw phase asynchronous motor
3. Transmission: Main transmission motor with 1:17 reduction gears
4. Control form: computer control
5. Mode of exercise: Main motor exercise brings frame vertical motion up and down.
   1. Automatically location device

1. Type: a) Computer automatically fixed length control type: accuracy: ≤0.5mm
        b) reflecting type photoelectric sensor detection:accuracy: ≤0.5mm
2. Photoelectric search range: 0~10 mm( range is set by computer, automatically search )
3. Correct compensate range: ±1~±5 mm
4. Location correct type: photoelectricity and servo motor coder feedback computer control
   1. temperature control device

1. Detection mode: thermocouple Detection E type
2. Control type: computer control, solid-state relay drive PID adjustment
3. Temperature range: 0~300ºC
4. Detection temperature spot: Middle in electric heating piece
   1. Cutting knife

1. Structure: up cutting knife+ adjustment device + fixed down cutting knife
2. Transmission: eccentric shaft motive power
3. Adjustment: level moving, pulling handle adjust the angle of cutting.
   1. Waste collector

1. Structure: horizontal type Reciprocating screw collecting waste material.
2. Drive: AC motor
3. Control:sensor
   1. Punch device

1. Structure: Bow type pneumatic type punch mould
2. Control form: computer control
3. Drive: electronic switch drive magnetic valve(DC24V)
4. Punch hole seat: guide rail type support bow type manual level adjustment.
5. Moulds: Ling form hole 4×2(1 sets)round holeφ6(1 sets)
   1. Times to send device

1. Structure: pneumatic type cushion and nonsynchronous heat protection type
2. Control form: computer control
3. Drive: electronic switch drive magnetic valve(DC24V)
4. Motion type: 4 sets transverse heating knife, 2 sets cooling knife, nonsynchronous motion.
5. Quantity of times to send: from 2-6 times(it is set in computer)
   1. Automatically carry device

1. Structure: O type lever station
2. Drive: solid-state relay drive, gear reduction speed single phase motor
3. Transmission: helical gear transmission
4. carry range and quantity: set in computer freely
5. Control form: computer control

1. Supporting facility(offered by the user)

1. Power: three phase 380V±1050Hz   air switch 150A
   With zero wire, earth wire(R.S.T.E)
2. Capacity: ≥50Kw
3. air source: 35 L/min(0.6Mpa)
4. Cooling water: 15 L/min

1. Optional: (not including the price)

1. adding punch hole
   it must be statement More than the basic punching configuration
2. Abnormal shape sealing knife
   it can be made especially according to the user's request.

1. Key parts list

Position name	Parts name	Model	Quantity	Supplier
Pulling	Pulling motor	1KW/1 sets /1.5KW/1 sets	2 sets	Panasonic
	Pneumatic part			Airtac, Taiwan
Transmission	Reducer	1:17(3.7KW)	1 set	Taiwan
	Transducer	3.7KW	1 set	Panasonic
Feeding	Transducer	0.75KW	2 sets	Panasonic
Control part	PLC		1 set	Panasonic
	Touch screen	10.4inch Color	1 set	Weinview, Taiwan
	Solid relay		24 pcs	China
	Magnetic powder brake	2.5/1 sets	1 sets	China
	Edge controller	Double sensor	1 set	China
	Off way controller	PPK-	1 set	China
Bearing	Oscillating bearing			South Korean
	Drive bearing			Harbin
Detecting part	Photo electric senso		1 pcs	Taiwan

 

Position name	Parts name	Model	Quantity	Remark
Heating knife	Longitudinal knife	10mm	2 pcs	China
		20mm	2 pcs	China
	Transverse knife	5	2 pcs	China
		10	2 pcs	China
		20	2 pcs	China
		30	2 pcs	China
	Flat knife		2 set
	Common edge machine		1 set
Remark: the parts above include parts which come with machine.

  










 

FAQ

1.Is your company trading company or manufacturer?
We are manufacturer specialized in plastic machine  for more than 35 years, all of our engineer with more than 20 years experience.

2. Where is your factory? How can i visit your company?
Our factory is located in Ruian city,zhejiang province, China.
Its about 40 minutes from shanghai by plane(4 hours by train). We will pick you up on airport or station. Welcome to visit our manufacture.

3 What's the scale of your company?
Our company covers 14000 square meter, over 11000 square meter of which is bulding area, consisting over 100 staffs, 20 engineers for technical support.

4 How long is your delivery time?
Our delivery time is 30-45 days. Ugently, we can make your machine first. About 10 days. 

5 What's your warranty policy?
18 month guarantee and 1 year after-sales maintenance.
 
6 What package do you use for the product?
Covered with plastic film. Wooden box package need extra cost .
 
7 Does your manufacture provide installation service?
Our engineer can go to customer factory to installation. Buyer should prepare materials to test the machine in advance and should be responsible for the cost of supplier's technician, including round air tickets, visa cost, accommodation and salary since the day start out until the day arriving at factory.

8 What are your terms of payment?
We accept T/T, L/C. western union.

9 How could we do if the parts broken within warranty?
We would express the free replacement parts during the warranty date.

10 Does your engineer understand English?
Our engineer understand a little English. But don't worry, We have professional translators.And All our engineer have more than 20 years machine installation experience.