5 Color Computer Medium-Speed Gravure Printing Machine PLC Economical Type

• Warranty: Forever
• Condition: NEW
• System Supported: Printing Machine
• After-Sales Service Provided: on Line Support
• Printing Interface: Printing Machine
• Applicable Material: Textile, Film, Paper, Plastic
• Model NO.: DFASY1000C
• Arrangement Position of Color Groups: Combined Gravure Press
• Usage: Flexible Packaging Gravure Printing Machine
• Feeding Mode: Sheet-Fed Gravure Press
• Automatic Grade: Automatic
• Color & Page: 5 Color
• Structure: Double Air Cylinder Pressure
• Transport Package: Sea Worthy Export Standard
• Trademark: SANBI
• Origin: China
• HS Code: 8443170090

Product Description

1. Main parameter:
   1. Printing: Colors:5 colors 7 unit
   2. Printing material available: BOPP, PET, PE, PVC, CPP, nylon film, Glass paper, paper,and its It has the same properties as the above materials.
   3. Max.width of printing material :1030mm
   4. Max .printing width :1000mm
   5. Machine speed: 150m/min
   6. Max.Printing speed:100-140m/min(varies according to the different printing material ink and the familiarity of the operator.etc.)
   7. The Max diameter of unwind and rewind:600mm
   8. Diameter of printing cylinder:100mm-320mm
   9. Register precision: Vertical  ± 0.10mm(Automatic)

                  Horizontal±0.10mm(Manual)

1. 1. Diameter of web: 76mm (inner)*92mm (outer)
   2. Main Motor:Frequency Motor 11kw
   3. Machine Power: 80kw (Running about 40kw)
   4. Overall dimension: 9500×2850×2700mm
   5. All machine cast iron
   6. Net weight:10.5T
2. Machine configuration

2.1  unwind part

1. Double position rotary frame with two arms
2. Turning frame flip by motor drive (electric flip)
3. Turning motor: 0.37kw
4. Magnetic particle brake: 50N.M (2 pcs)
5. Roll material lateral manual adjustment: + 20mm
6. Material shaft double magnetic powder brake by automatic tension control
7. Automatic tension controller: 1 sets
8. Unwinding diameter: φ600mm
9. Tension control range: 3-50kg
10. Pneumatic shaft: φ76mm

 2.2 Unwind  traction

1. 1. 1. Double roll type, traction steel roller and pressure roller
      2. The diameter of steel roller: Ø130mm; rubber roller: Ø110mm  PU rubber.
      3. The clutch pressure regulating rollers: pneumatic clamp
      4. Traction roller controlled by magnetic powder brake
      5. Traction magnetic powder brake: 25N.M
      6. Tension control range: 3-25kg

  3. Printing Unit
   color register Adjust the use of synchronous motor Compensation roller adopt, floating, mobile for ball screw, the gap is small, flexible work,Fast reaction rate
3.1  Printing Cylinder

1. 1. 1. Version of roller control: Manual
      2. Transmission box: high precision gear box
      3. Cylinder installation: shaftless pneumatic type.
      4. The max.length of the printing cylinder: 600mm to 1050mm.(Lengthened oven,Not long Taper bushings,Convenient mounting cylinder)
      5. Diameter of printing cylinder:100mm-320mm

3.2 Printing pressure structure
    1.Printing pressure method: double air cylinder pressure. Imprint force can be adjusted according to need (3 file control)
2.Max.printing pressure: 380kg , the pressure adjust
3. rubber roller: Ø100mm  PU rubber.
3.3 Doctor blade
1. The knife rest device for double blade, three range structural adjustment, to create the best position and angle of the blade.
2. knife can move, driven by an independent motor, reduce the impact on the printing part
3. The movement of the doctor blade: ±5mm
4.360 degrees adjustment adopts gapless deceleration motor
   3.4 Ink stand

1. printing cylinder directly dipped into the ink dish.
2. Ink stand up and down in vertical direction, adjusted by handwheel.
3. Ink dish: Stainless steel

3.5 ink circulation system: single phase pneumatic diaphragm pump (ink pump)  
3.6 Drying part

1. 1. 1. 1. Structure type: Sealed oven, energy saving, quick drying.Galvanized plate oven (rust proof)
         2. Heating mode: electric heating
         3. Open mode: Manual
         4. Electric heating temperature control: automatic constant temperature control
         5. Fan cold and fan hot: centrifugal fan (oven long1.6 meters )
         6. heating pipe outside (stainless steel), energy-saving more safe
         7. Circulating wind. Hot air adopts suction way (small noise, more electricity saving)
         8. Outside paste small oven
         9. Ventilation: reserved ventilation device

      3.7 Guide roller
           1. Guide roller: Taiwan funded Shanghai production guide roller, aluminum alloy after moving, static balance treatment
2.  Guide roller length: 1030mm
3.  Guide roller diameter: φ80mm
4.  Key parts: The key part isφ100mm
   4. Rewind  traction

1. Double roll type, traction steel roller and pressure roller
2. The diameter of steel roller: Ø130mm; rubber roller: Ø100mm  PU rubber.
3. The clutch pressure regulating rollers: pneumatic clamp
4. Rewind traction motor: torque motor (PLC control, tension automatic)

5. unwind part

1. Double position rotary frame with two arms
2. Turning frame flip by motor drive (electric flip)
3. Turning motor: 0.37kw
4. Roll material lateral manual adjustment: + 20mm
5. Tension is the composition of the torque motor (controlled by PLC, automatic tension).
6. Unwinding diameter: φ600mm
7. Tension control range: 3-25kg
8. Pneumatic shaft: φ76mm

    6. Frame and transmission part

1. 1. 1. 1. Integral high strength low stress alloy cast iron wall plate
         2. Thickness of wall width: 70mm
         3. wallboard width: 450mm
         4. The main motor through the main driving shaft and a plurality of coupling and gear box transmits power to the drive operation of every color, roll
         5. The gear box and the transmission shaft are connected in an elastic connection.
         6. Pneumatic clutch on the Cylinder (Integral wall plate)
         7. Transmission shaft: φ40mm
         8. Distance between each unit:1000mm

7.Lighting system
The LED electronic energy-saving lamp,Explosion proof lamp
8.ARC SYSTEM
Auto color register system; with video inspection (KESAI 2000B model  Computer )

1. Computer closet :1 pcs
2. Micro-processor: 4 pcs
3. Electronic-eye:  4 pcs